Container Management Release Notes¶

This page provides the Release Notes for container management to help you understand the evolution path and feature changes from release to release.

2024-09-30¶

v0.32.0¶

Features¶

Added support for Volcano Binpack and Priority Preemption Strategy
Added support for the use of Muxi GPU cards
Added GPU utilization metrics in the GPU monitoring panel
Added quota and usage display for namespaces
Added support for kubeconfig issued by the platform to be permanently valid
Added custom roles now support permission mapping between workspaces and namespaces
Added the feature to create PVCs through snapshots, allowing users to select their own StorageClass

Improvements¶

Improved the text prompt for available GPU computing power in full GPU card mode
Fixed an issue where the bound workspace was not displayed after binding a namespace, requiring a manual page refresh
Improved compatibility with PVs where volumeMode is set to block
Improved cleaned up intermediate images after merging Addon image architectures

Fixes¶

Fixed an issue where the vGPU setting showed a computing power of 100 but the dashboard's Pod utilization rate displayed 0%
Fixed an issue where the GPU Operator did not enable the Driver option, resulting in the GPU mode switch function not being displayed
Fixed an issue where the number of GPUs displayed on the dashboard exceeded the actual value
Fixed an issue with incorrect GPU utilization display on the node details page in MIG Mixed mode
Fixed an excessive memory usage issue in the Binding Syncer for large-scale scenarios in 1000+ clusters
Fixed a sudden increase in Redis connection counts when binding workspaces to each cluster in 1000+ clusters, which would not close for a long time
Fixed an issue of resource permission confusion in workspace sharing in large-scale scenarios in 1000+ clusters
Fixed the lack of audit logs when binding workspaces to clusters
Fixed an issue where virtual machine clusters appeared in compliance scanning within security management
Fixed an occasional issue of two uninstall Jobs appearing when uninstalling Helm applications
Fixed an installation failure issue of metrics-server when upgrading the installer from v0.19.0 to v0.20.0
Fixed an issue where the detection task was not canceled when clicking 'Check' and then 'Cancel' during cluster creation, resulting in subsequent checks showing as still in progress
Fixed an issue in container management -> node management where global service clusters could not add or remove nodes
Fixed an issue where a cluster showed as deleting indefinitely despite having actually failed to uninstall
Fixed an issue where finalizers resources under kpanda-system were not deleted when detaching a cluster, preventing the deletion of the kpanda-system namespace
Fixed an issue where the downgrade compatibility package for kubean in DCE 5.0 environments did not successfully delete low-version clusters
Fixed an issue of incorrect display of backup recovery trigger times
Fixed an issue where the cluster inspection configuration's scheduled task hour did not match the trigger time with the configured time.

2024-08-30¶

v0.31.0¶

New Features¶

Added support for heterogeneous GPUs, including Metax GPUs.
Added support for installing Red Hat 9.2 driver images via GPU operator for heterogeneous GPUs.
Added functionality to check and remind users of the validity period of cluster access certificates.
Added support for viewing Helm content and generated orchestration files directly in the UI.

Improvements¶

Improved the audit logs for switching GPU modes on nodes.
Improved the layout of the NPU panel.
Improved the wording on the GPU resource interface.
Improved the issue where GPU labels on nodes were not removed until three minutes after the gpu-operator was uninstalled.
Improved documentation for GPU metric alert operations.
Improved the handling of a single GPU failure in multi-GPU scenarios, resolving the "UnexpectedAdmissionError" status for Pods during workload scheduling.
Improved the access method for work clusters created by Kubean to use ServiceAccount Token authentication.
Improved the removal of LeaseController from cluster_controller.
Improved the kpanda-controller-manager to add some business-related monitoring metrics.
Improved the repo_controller to include business monitoring metrics for Repo synchronization/downloads.
Improved the cluster_setting_controller to add monitoring metrics for plugin synchronization.
Improved the removal of informerFactory from GPUSchedulerController.
Improved the multi-controller to allow specifying whether to enable or disable Controllers.
Improved the logic in cluster_status_controller by introducing successThreshold and failureThreshold.
Improved the introduction of parameters to control concurrency for Controllers.
Improved unified logging output levels.
Improved the time for re-queuing controllers.
Improved the binding-syner Controller to allow specifying whether to enable or disable it.
Improved the default version of custom resource CRDs.
Improved the service list to support searching by service name, access method, and access port.
Improved the experience of node time consistency during Kpanda cluster installation.
Improved to prohibit concurrency in Helm lifecycle operations.
Improved to add K8s orchestration confirmation during Helm installation.
Improved the workload rollback feature to display detailed version information.

Fixes¶

Fixed the inconsistency between GPU memory usage of GPU driver Pods and the information displayed in the application.
Fixed an issue where the vGPU mode switched to full card mode after shutting down and restarting the VM.
Fixed the loss of labels on nodes after enabling NPU virtualization.
Fixed the incorrect display of GPU utilization rates in the GPU Pod dashboard.
Fixed the incorrect display of GPU memory usage/rates in the GPU Pod dashboard.
Fixed an issue where monitoring metrics did not display data when creating workloads using Ascend cards.
Fixed an issue where changes to deviceSplitCount in vGPU mode were not effective.
Fixed an issue where the page could not reflect the memory size when 5000 was entered in vGPU mode.
Fixed an issue where the GPU type dropdown for Addon plugins under the cluster settings menu did not display information related to MIG.
Fixed the problem of continuous crashes when restarting nodes with GPUs or upgrading the driver pod for vgpu-device-plugin.
Fixed the inconsistency between GPU memory quota units and memory quota units.
Fixed the failure to update Go dependencies due to conflicts with the otel dependency.
Fixed an issue where the cloudshell CRD timeout page still prompted for reconnection.
Fixed an issue where users with clusteradmin permissions (without global service cluster permissions) could directly access the details page of the global service cluster from the recent operations -> cluster operations page.
Fixed the 403 error when users with Namespace Admin permissions viewed basic information about container configurations on workload detail pages.
Fixed an issue where the NS quota was displayed, but the edit page data was empty.
Fixed the inconsistency between the image addresses displayed on the container group detail page and the workload detail page.
Fixed an issue where the port information was not displayed correctly when entering the health check page of the container configuration after updating the insight-ui stateless workload.
Fixed the abnormal display issue of the kubeproxy version on nodes.
Fixed an issue where DCE5-0.19 had problems recognizing the system code when accessing nodes or creating clusters on Ubuntu 22.04.
Fixed the unknown status issue when creating Helm applications.
Fixed the initial status of applications displayed as failed when creating Helm applications in work clusters.
Fixed an issue where the status of readiness waiting configuration was not recorded during the update of Helm applications.
Fixed an issue where enabling readiness waiting for sub-cluster installation of Helm applications failed, and the Helm application status remained in installation.

Known Issues

Fixed the version mismatch between kpanda front-end and back-end, which could cause the vGPU mode to switch to full card mode after shutting down and restarting the VM.

2024-07-31¶

v0.30.0¶

Features¶

Added support for installing Koordinator plugins via Addon, completing online and offline mixed scheduling.
Added UI supports 7-day or custom date options when generating kubeconfig.
Added Helm charts support viewing Helm content and generated orchestration files on the interface.
Added offline gpu-operator default operating system support for CentOS 7, Ubuntu 22.04, Ubuntu 20.04.
Added support for Ascend NPU virtualization in document format.
Added NPU monitoring dashboard supports switching between Chinese and English.
Added gpu-operator supports enabling RDMA.

Improvements¶

Improved added domain name field to Ingress list.
Improved support for "Cluster Vendor" name in global service clusters (Daocloud Kubean).
Improved Kpanda performance.
Fixed an issue where certificates generated by kpanda's GetClusterAdminKubeConfig were unusable if they expired in one year.
Improved support for checking and reminding about the validity period of cluster access certificates.
Improved interface calls for obtaining installation configurations when installing Helm charts.
Improved in addon-pack charts, images support specifying the architecture for pulling images via the --platform flag.
Improved decoupling of helm controller from cluster service and rbac service and other improvements.
Improved experience when switching GPU modes by adding switching status.
Improved guide users on how to switch GPU modes when installing nvidia-vgpu and gpu-operator.
Fixed misunderstanding issues when mig single mode was recognized as full card and used by users.

Fixed¶

Fixed an issue where HPA created by various modules was invalid due to metrics-server not being installed by default in global service clusters.
Fixed an issue with Kpanda database connection.
Fixed an issue with PV/PVC permissions for the NS Admin role.
Fixed an issue where egress port refresh led to data flow interruption and controller-manager malfunction after modifying cluster basic configurations.
Fixed an issue where restarting workloads in the access method page of workload details resulted in a 404 error for the service interface.
Fixed an issue with the missing offline package for cro-operator in addon.
Fixed an issue with unintended system reboot during automatic kernel updates on Ubuntu.
Fixed an issue with occasional display of full card mode on nodes when using MIG mode.
Fixed an issue where memory overcommit feature was unavailable after GPU virtualization.
Fixed an issue with occasional failure in switching GPU scheduling policies when adjusting GPU scheduling policy.

2024-06-30¶

v0.29.0¶

Features¶

Added support for K3s as a Kubernetes distribution for connected clusters.
Added GPU status monitoring, viewable on the observability platform via XDI metrics.
Added support for GPU scheduling Spread (cluster level).
Added support for GPU scheduling Binpack (cluster level).
Added support for GPU node scheduling Spread (cluster level).
Added support for GPU node scheduling Binpack (cluster level).
Added support for GPU node scheduling Spread (workload level).
Added support for GPU node scheduling Binpack (workload level).
Added support for GPU scheduling Spread (workload level).
Added support for GPU scheduling Binpack (workload level).

Improvements¶

Improved download station addon package to support multiple offline packages automatically.
Improved Helm installation to be more cloud-native, with the controller managing Helm operation jobs.
Improved quick link to view GPU resource allocation on the node details page, optimizing the integrated GPU quota issue on the monitoring page.
Improved gpu-operator to support driver installation on the same OS with different kernel versions.
Improved support for binpack/spread at the cluster level for GPUs and nodes, reaching product-level support for binpack/spread.
Improved configmap/secret editor to support horizontal movement.
Improved version selection filtering when updating modules.
Improved issue where workspace admin permissions mapped to cluster admin permissions in container management did not display.
Improved container log interface to support displaying 1000 lines.

Fixed¶

Fixed an issue where deleted users still appeared in the cluster permission user list.
Fixed an issue where cloudtty pod could not use kubeconfig with certificates to access sub-clusters.
Fixed an issue where multi-architecture integration led to missing images in addon packages, causing service disruptions.
Fixed an issue where the Deployment instance list displayed Pods not belonging to the current Deployment.
Fixed an inconsistency between GPU memory allocation rate in the GPU node dashboard and the actual node.
Fixed an issue with incorrect display of GPU node labels.
Fixed an issue with LoadBalancer type service where updating the lb IP address and viewing service details occasionally showed nodeport access method.
Fixed an issue with configuring multiple GPU types in mig mode when creating workloads.
Fixed an issue with configuration mismatches in MIG Mixed mode when Deployment specified multiple different GPU types.

v0.29.0 and above upgrade notes

2024-05-31¶

v0.28.0¶

Features¶

Added support for ws admin+cluster admin to bind clusters/namespaces to workspaces in Kpanda.
Added support for specifying volume snapshot classes when creating storage volume snapshots.
Added support for modifying storage capacity in temporary paths when creating workloads.
Added NPU-related metrics to load monitoring.
Added validation for the presence of extended edge unit instances when disconnecting a cluster.
Added optional use of egress in Kpanda for connected clusters.
Added support for multiple offline packages (standard offline package / GPU offline package) in addons.
Added compute usage metrics to the GPU monitoring panel.
Added NPU-related metrics support in workloads.
Added Nvlink metrics support in Kpanda metrics.

Improvements¶

Improved display when disconnecting management clusters and sub-clusters.
Improved prompt when loadBalancerIP is unavailable during service updates.
Improved binding-syncer to support lease election.
Improved unified description of compute units in full-card mode for Kpanda.
Improved GPU monitoring metrics to support both English and Chinese.
Improved default suggestion to disable servicemonitor during vgpu installation.

Fixed¶

Fixed an issue where creating a multi-cloud instance namespace caused errors in container management queries.
Fixed an issue where clicking the restart button in the job list caused errors and deleted jobs.
Fixed an issue where kube-system and default namespaces were not synchronized to ghippo when connecting kind clusters.
Fixed an issue where workspace-bound cluster resources were not filtered for multi-cloud clusters.
Fixed an issue where workspace admin permissions mapped to cluster admin permissions in Kpanda did not display.
Fixed an issue where the certificate generated by the Kpanda GetClusterAdminKubeConfig interface was only valid for one year, causing expiration issues.
Fixed an issue where restricted namespace resource configurations for admin users did not reflect for NS admin accounts.
Fixed an issue where worker nodes failed to connect in an online environment on Ubuntu 2004.
Fixed an issue where upgrading from version 14.1 to 16.1 using the installer resulted in cluster creation errors and inability to select kube version.
Fixed a display issue after cluster creation failure.
Fixed an issue where kocral did not support backup and restoration of cluster resource namespaces.
Fixed an issue where disabling scheduled inspections was ineffective.
Fixed an issue where the frontend returned incorrect information when pods still had issues after installing the insight component.
Fixed an issue where the GPU list was missing when specifying GPU models during Deployment creation in vGPU mode.
Fixed an issue where GPU Pod monitoring dashboards had inconsistent display information in several places.

2024-04-30¶

v0.27.0¶

Features¶

Added support customizing NS admin/editor/viewer permissions through CRD configuration
Added support connecting to cloudtty via SSH
Added support accessing running containers through the console
Added Install Ascend components Device Plugin and NpuExporter through Helm app scend-mindxdl, and view relevant metrics of Ascend GPUs through Insight

Improvements¶

Improved Add audit logs for binding/unbinding workspace to ns in the kpanda interface
Improved Support running make commands in local containers
Improved ns quota configuration prompts
Improved concurrent updates of Helm apps
Improved Add more monitoring metrics to GPU monitoring dashboard

Fixes¶

Fixed an issue with not being able to find mounted PVC volumes from the Deployment page
Fixed an issue with inability to select S3 region in etcd backup policy
Bug Fix Support token authentication for kpanda openapi proxies
Fixed unpaginated results in liststorageclasses interface
Fixed an issue with failed execution of cd_to_prod_site job in version release pipeline, requiring CI/CD script update
Fixed an issue with upload failure when uploading files to target containers multiple times
Fixed instability of cluster after long-running kpanda-binding-syncer in kairship e2e online environment
Fixed an issue with empty docker_rh_repo form when running with docker as the runtime for access nodes
Fixed echo issue when retrying after cluster creation failure
Fixed an issue with child clusters still being displayed as managed by the parent cluster after removing cluster integration
Fixed failure in node authentication check when creating cluster with RedHat8-OS and key authentication
Fixed an issue with fluent-bit failing to start when selecting insight-agent installation during cluster creation
Fixed failure in reset.yml execution by kubespray due to symbolic links in kubelet after retrying cluster creation
Fixed an issue with helm repo not found during Insight Server upgrade
Fixed an issue with ready check showing as disabled when creating metallb with ready check enabled but showing as disabled when editing
Fixed an issue with incorrect image addresses in synchronized chart packages when relocateContainerImages is set to false in charts-syncer
Fixed an issue with inability to restore modified PVC data after successful restore of sts+pvc backup
Fixed backup failure when creating backup policy without backing up data volumes, but including PVs in backup resources
Fixed an issue with always returning 0 available resources in vGPU mode
Fixed an issue with GPU type displayed as MIG Mixed MIG Single in node details page under mig mixed mode
Fixed an issue with AI processor count always showing total value in ascend monitoring dashboard
Fixed inconsistency between labels on nodes and GPU types displayed in node details page
Fixed incorrect PCIE data in GPU Pod Dashboard

2024-03-28¶

v0.26.1¶

Features¶

Added cloudtty provides SSH proxy functionality
Added support for connecting to master nodes
Added application backup plans can now be created via YAML
Added capability to select backup objects based on resource type for application backup
Added support for deleting cluster inspection templates
Added deployment of NPU monitoring panel through npu-exportor
Added display of available GPU resources when creating workloads
Added capability to set job priority when creating workloads
Added support for oversubscription of vGPU computing power
Added scenario-based video for vGPU
Added the capability to set the time zone when creating a cluster

Improvements¶

Improved adaptation for the productization of the ZTE Kirin v7u6 version.
Improved display of resource utilization percentage.
Improved external mode in offline environments, cluster creation, and manual selection of yum repo information.
Improved productization guidance and documentation for uploading Helm charts.
Improved guidance for deploying GPU operator and Nvidia vGPU when the GPU switch is enabled.
Improved logic for GPU switching.
Improved validation of whether the node switch card is assigned.
Improved display of oversubscription resources in vGPU mode on the node details page.

Fixes¶

Fixed an issue with kube-vip when creating a cluster.
Fixed an issue where cluster creation failed when "Enable kernel tuning for new cluster" was selected.
Fixed an issue where Helm failed to reinstall after a failed installation.
Fixed an issue where values could not be retrieved during a Helm app update after machine reconnection.
Fixed a default rendering error for image addresses during offline installation of Submariner.
Fixed an issue with duplicate concatenation of image addresses during Kpanda upgrade.
Fixed an issue where the status remained "In Progress" continuously after backup restoration.
Fixed an issue where inspection did not start after reaching the inspection frequency when scheduled inspection was enabled.
Fixed an issue where removed nodes were still displayed in dashboard filtering after being removed from a cluster.
Fixed an issue where GPU memory allocation rate did not update on the node details page after stopping GPU-enabled applications (open-source issue).
Fixed an ambiguity in computing power and memory monitoring metrics for Pods in vGPU mode.
Fixed an issue with inaccurate allocation count in MIG single mode.
Fixed an occasional inaccuracy in GPU count in MIG mode.
Fixed an issue where information from multiple nodes with GPUs could not be distinguished in the cluster dashboard without node filtering.
Fixed an unclear prompt for vGPU usage duration, leading to incorrect usage.
Fixed a display issue with GPU mode switching status.

2024-01-31¶

v0.25.0¶

Features¶

Added support for batch deletion/stop of multiple workloads
Added support for setting time zone during cluster installation
Added one-click enablement of Velero plugin during Velero installation
Added option to enable or disable kube-vip control plane LB capability during cluster creation
Added support for importing heterogeneous Addon packages
Added capability to create GPU workloads on specific GPU models

Improvements¶

Improved availability of GPU node switching, reducing switch time to within 2 seconds
Improved logic for GPU mode switching
Improved documentation for GPU-operator installation failure in Ubuntu environment
Improved deep review and optimization of GPU dashboard (including vGPU, MIG, and whole GPU)
Improved functionality related to GPU statistics at node level using custom metrics
Improved latency when accessing drop-down menus for creating PVCs, network policies, and routing in cluster details page for large-scale clusters
Improved browser freeze issue when switching namespaces after adding forwarding rules in clusters with 1000+ services
Improved image selector to prevent page freeze when there are 1000+ image repositories
Improved application backup logic

Fixes¶

Fixed an issue where crontab configuration with cron expression caused inability to modify CronJob configuration
Fixed infinite loop issue in installer caused by Redis Sentinel configuration
Fixed refresh loop issue in console (cloudshell) reconnection mechanism, affecting command execution
Fixed incorrect display of container CIDR after integration with DCE4
Fixed incorrect image address in online upgrade of installer for kcoral image
Fixed failure to restore Job during backup recovery
Fixed an issue where enabling both HPA and CronHPA resulted in CronHPA being overwritten
Fixed ineffective selection of installing Insight plugin during cluster creation in kpanda
Fixed inability to upgrade current global cluster despite the page showing upgrade availability
Fixed inability to set multiple lines in calico_node_extra_envs in Advanced Settings during cluster creation
Fixed abnormal display of memory usage and other related metrics in cluster inspection report for pods
Fixed failure to filter deleted pod information in NVIDIA GPU Pod dashboard in Pod filtering
Fixed display issue where username and password fields still appeared when unified password was disabled during cluster creation
Fixed failure to create cluster when enabling kernel tuning for new cluster

2023-12-31¶

v0.24.0¶

Features¶

Added support for recording creation and deletion operations of services, ingress, volume claims, volumes, and storage pool resources in kpanda audit logs
Added compatibility with kubean to achieve downward compatibility with k8s versions in kpanda
Added support for hot restart of Pods in Cloudtty
Added integration of clusterpedia with OTEL Tracing
Added support for minimal installation of security, inspection, backup, and virtual machine components
Added documentation for importing custom helm charts into the system's built-in addon repository
Added documentation for migration scenarios from DCE 4.0 to DCE 5.0 in limited cases

Improvements¶

Improved the refresh time for the Pod list in kpanda after adding a large number of clusters
Upgraded gpu-operator to v23.9.0 to reduce the gap with the community version
Improved backup and restore process for entire namespaces (including CR and PVC-related content) to display partial success and failure information

Fixes¶

Fixed an issue with permission leakage during addon lifecycle management.
Fixed an issue where jobs were ineffective when using the same name for scheduled scaling jobs.
Fixed an issue with detection on the page after installing kubernetes-cronhpa-controller in offline environments.
Fixed an issue with the default sorting order in the ListPodsByNodeOrigin API.
Fixed a rare occurrence of an empty container list in the ListContainersByPod API response.
Fixed an error message during the execution of the scheduled_e2e job in the pipeline, causing subsequent tests to not be executed.
Fixed an issue with unresponsive search in Data Collection when using Chinese characters.
Fixed an issue where namespace-resource quota was not taking effect and update exceptions.
Fixed an issue where read and write data was always empty in workload-load monitoring.
Fixed an offline image issue with the gpu-operator.
Fixed an issue with cluster management permission leakage to regular users during Helm installation in Kpanda.
Fixed an issue with incorrect display of data volume backups in backup details after enabling backup for a plan.
Fixed an issue where unauthorized users could still retrieve application backup plans of other clusters through the API.
Fixed an incompatibility issue between Velero version and Kubernetes version in DCE4.
Fixed an issue with slow loading of user and user group lists in large-scale scenarios.
Fixed a timeout error in the Clusterpedia API and the inability to retrieve cloud-edge collaboration status in large-scale scenarios, leading to usability issues.
Fixed an issue with missing display of all bound namespaces in large-scale scenarios in the namespace section.
Fixed an issue with slow loading of the ns API in the container management section of the global management cluster, causing page lagging issues.

2023-11-30¶

v0.23.0¶

Features¶

Added audit logs for key functionalities such as cluster creation, deletion, access, unbinding, and upgrade; node access and unbinding; creation/deletion of deployment, statefulset, daemonset, job, and cron job; deployment/deletion of Helm apps
Added support for integrating with ghippo LDAP user systems with usernames that exceed the legal range of K8s
Added lifecycle management for large charts such as insight-agent
Added support for hot reloading of ConfigMaps/Secrets
Added support for subPathExpr in data storage

Improvements¶

Improved display of the namespace to which an event belongs
Improved status of ETCD backup policy
Improved error message when MySQL fails
Improved workload node affinity/workload affinity/workload anti-affinity
Improved support for removing abnormal nodes

Fixes¶

Fixed an issue with workspace exceeding total quota for allocated resources
Fixed security vulnerability of SQL injection
Fixed an issue with failure to create UOS system clusters

2023-11-06¶

v0.22.0¶

Features¶

Added support for upgrading system component versions and modifying system component parameters through the interface.
Added compatibility with RedHat 9.2 cluster creation.
Added support for Nvidia full card, vGPU, and MIG GPU modes.
Added support for Tianjic GPUs.
Added support for namespace-level GPU resource quota management.
Added support for application-level GPU resource quota.
Added Offline deployment and usage support for CentOS 7.9 and Redhat8.4 GPU Operator.
Added support for monitoring cluster, node, and application-level GPU resources.
Added Offline upgrade support for Container Management, Application Backup and Restore, Cluster Inspection, and Security Scanning product modules.
Added support for multi-architecture deployment of Helm Charts.
Added support for same version upgrade of clusters.
Added support for Configmap/Secret hot reloading.
Added Custom parameter configuration support for cluster-node checks to meet enterprise node encryption authentication and other scenarios.

Improvements¶

Improved support for viewing associated information in Configmap/Secret details page.
Improved Resources visible for different permission users when entering Container Management.
Improved support for automatic refreshing of Helm Repositories and auto-refresh switch within a specified time interval.

Fixed¶

Fixed an issue where cluster uninstallation was not possible when cluster status was unknown.
Fixed an issue where CPU usage data was not available for pod in the list.
Fixed an issue where Insight-agent and Metrics-server plugins couldn't be installed on ARM architecture.
Fixed an issue where node check failed when creating a cluster using a key.
Fixed an issue where environment variables couldn't be added when creating a workload.
Fixed an issue of remaining deleted user data.
Fixed pagination issue in CIS compliance scan, permission scan, and vulnerability scan report list pages.
Fixed an issue where static PV pointed to incorrect StorageClass when created.

2023-9-06¶

v0.21.0¶

Features¶

Added connectivity check for Helm Repo passwords, with support for skipping TLS certificate authentication.
Added scaling of worker nodes for global service machines.

Improvements¶

Improved support for uninstalling related components during cluster integration.
Improved pod status handling logic, including sub-status for pods.
Improved the feature to configure the number of job records to keep for cluster operations.
Improved support for configuring the number of control nodes when creating worker clusters.
Improved prompt for installing Insight-agent if it is not already installed.

Fixes¶

Fixed an issue of missing configuration parameters when updating helm app instances.
Fixed display error in associated instances for Networkpolicy.
Fixed an issue of cluster creation failure due to maximum pod count in cluster configuration.
Fixed an issue of failed creation of worker clusters with Redhat type.
Fixed an issue of "no permission" error when namespace-level users view CronJob details.
Fixed an issue of users unable to bind to workspaces.

2023-8-01¶

v0.20.0¶

Features¶

Added helm app interface supports viewing Helm operation logs.
Added workload clusters support heterogeneous node integration.
Added batch import of nodes supported for cluster creation.
Added container storage supports creating NFS-type data volumes.
Added support for vGPU, with automatic detection of node CPUs and support for adding negative CPU quota in workload configuration.

Improvements¶

Improved cluster integration logic. When integrating a cluster with a new management platform after the initial integration, it is necessary to clean up the data redundancy from the old management platform before it can be integrated. For more details about cluster integration, refer to Uninstall/Deintegrate Cluster.
Upgraded clusterpedia to v0.7.0.
Improved permission-based page interactions, where users without permissions will not be able to access pages with no resource permissions.
Improved advanced parameter configuration, such as kernel tuning, for integrated nodes.
Improved installation detection mechanism for Insight component.

Fixes¶

Fixed an issue where helm jobs remained in "Installing" or "Uninstalling" state.
Fixed kernel version detection error when checking node creation.
Fixed an issue where customizing namespaces was not possible for plugin cluster creation.
Fixed default addition of ca.crt data in key updates.

2023-7-06¶

v0.19.0¶

Features¶

Added compatibility for deploying worker clusters on openAnolis / Oracle Linux operating systems.
Added support for automatically adding JFrog authentication information when creating clusters in an offline environment.
Added validation rules for environment variable rules when creating workloads.
Added edge load balancing and services.
Added dual-stack and system kernel as pre-check items for nodes.
Added the feature to mount secretKey/configmapKey as ConfigMaps inside containers when creating workloads.

Improvements¶

Improved helm repository refresh mechanism.
Improved some I8N English translation interfaces.

Fixes¶

Fixed an issue where custom parameters entered when creating a cluster would incorrectly convert values of 0 or 1 to true or false.
Fixed an issue where containerd account password configuration could not be written when creating a cluster in an offline environment.
Fixed an issue where upgrading a cluster with version 1.26 or above failed due to changes in the Kubernetes container registry.
Fixed an issues related to namespace-level users not being able to use StorageClasses to create PVs.
Fixed an issue where specifying a namespace when creating a route did not take effect.
Fixed an issue where the date returned incorrectly after upgrading the cluster.

2023-6-03¶

v0.18.1¶

Removed the maximum length limit when setting custom parameters for cluster installation.

2023-5-28¶

v0.18.0¶

Features¶

Added inspection report download.
Added global audit logs for high-priority operations.
Added timeout handling for connecting to Minio.

Improvements¶

Improved the mounting of KubeConfig in CloudShell from using ConfigMap to using Secret.
Added a switch to filter clusters that have backup strategies when selecting a cluster for creating a backup policy.

Fixes¶

Fixed the offlineization of etcdbrctl images.
Fixed an issue where the image selector could not select an image.
Fixed the rendering of Repo address when creating a cluster.

2023-04-28¶

v0.17.0¶

Features¶

Added capability to download patrol report
Added view of ETCD Backup Low
Added support for enabling Flannel and Kube-ovn network plug-ins while creating a cluster
Added support for Cilium dual-stack networking while creating a cluster
Added automatic recognition of the node OS type while creating a cluster
Added services of type Headless and External
Added upgrading of kubernetes version of a worker cluster in an offline environment
Added cluster-level resource backup
Added creation of workload with a private key
Added default resource limits configuration for Helm job
Added creation of PVC using hwameistor

Improvements¶

Improved Applying Backup Cluster State
Improved Matching the workload state in the workload detail and the state of the pod under the load
Improved node check interface in offline mode
Improved presentation of multicloud applications

Fixes¶

Fixed helm app configuration missing issue
Fixed an issues with creation failure due to ns inconsistency while creating multiple types of resources using yaml
Fixed the failure to select Docker 19.03 runtime using Kirin operating system
Fixed incorrect translation of English interface

2023-04-04¶

v0.16.0¶

Features¶

Added capability to query PVC events using the interface.
Added configuration of parameters such as backofflimit, completions, parallelism, and activeDeadlineSeconds while creating a job
Added integration of self-developed open source storage component Hwameistor and support for viewing local storage resource overview and other information in the container storage module
Added cluster patrol feature supporting second-level patrol (Alpha) of the cluster
Added application backup feature supporting quick backup and recovery (Alpha)
Added platform backup feature supporting backup and recovery (Alpha) of ETCD data
Added support for Ghippo’s custom role management cluster

Improvements¶

Improved kpanda uninstalls self-built cluster process to prevent cluster deletion due to user misoperation.
Improved User experience of recreating the cluster after the failure of the interface to create the cluster. Supports quickly reinstalling the cluster based on the configuration before the failure.
Improved Aggregated multiple Quotas when multiple Quota resources exist under one namespace.
Improved Information display of service access mode in workload details supporting rapid access to load service.
Improved Refresh mechanism of helm repo without enabling automatic refresh by default.

Fixes¶

Fixed Loadblance address unreachable issue.
Fixed Failed to perform an unmount cluster operation.
Fixed Cluster acquisition issue due to more than 64 characters connected to the cluster.
Fixed Cluster plugin display issue in offline environment cluster.
Fixed Global cluster failed to update configuration
Fixed First node check failure while creating a cluster resulting in no further node checks.
Fixed Environment variables for creating/updating workloads not taking effect.

2023-02-27¶

v0.15.0¶

Features¶

Added Productization support for Persistent Volumes (PVs), which supports selecting existing data volumes while creating PVCs.
Added capability to create clusters using Kubernetes networkless CNI.
Added support for the Chinese names of resources such as load, configuration, and service.
Added creation of multiple types of resources simultaneously while creating workload via YAML.
Added capability to pause and start workloads.

Improvements¶

Improved Cluster details page, experience of cluster switching.
Improved Workload status display, add Stopped status.
Improved Manual scaling window of workload increased to simplify user's manual scaling process.
Improved Accessing DCE 4.X cluster from cluster.
Improved Resync Workspace removes unwanted permissions properly.
Improved Cluster upgrade interface interaction experience.
Improved Namespace provided to quickly create an entry when Helm is used to create an application.

Fixes¶

Fixed DNS configuration issue forcing users to fill in upstream DNS while creating a cluster.
Fixed Workload version records sorted out of order.
Fixed Kubean upgrade via Helm not working.
Fixed Last exception promptmissing while creating a cluster.
Fixed an issue that the workload status is displayed incorrectly or cannot be refreshed in some cases.
Fixed an issue of missing prompt for Workspace deletion.
Fixed an issue of incorrect display of resource utilization information in some cases.
Fixed an issue of failed access to DCE 4.X clusters using domain names.

2022-12-29¶

v0.14.0¶

Features¶

Added support for displaying Chinese names and template suppliers in the Helm chart.
Added CronHPA, which enables timed scaling of workloads.
Added VPA (Vertical Scaling), which supports the manual/automatic modification of resource request values to achieve vertical workload scaling.
Added Exclusive hosting capabilities for namespaces.
Added StorageClass (StorageClass) support exclusive or shared entitlement to specific namespaces.
Added Creation of Workloads exposes the remaining resource quota for the current namespace.
Added Node connectivity check feature.
Added Mirror Selector to support the selection of mirrors within the Container registry while creating workloads.
Added backup and recovery features.

Improvements¶

Improved The process of cluster uninstallation by adding the cluster deletion protection switch.
Improved supports simultaneous creation of multiple resources when creating resources via YAML.
Improved The workload increases the manual scaling window to simplify the user’s manual scaling process.
Improved Service access mode experience, supports service quick access and display node, load balancing address.
Improved File upload and download functionality to support the selection of a specific container.
Improved support offline installation of different OS systems.
Improved Node configuration while creating a cluster in an offline environment supports the selection of node operating systems and the modification of offline Yum sources.
Improved The YAML editor does not fill in the Namespace field and supports autocomplete as default.
Improved Cluster upgrade interface interaction experience.
Improved When Helm is used to create an application, Namespace is provided to quickly create an entry.

Fixes¶

Fixed an issues with not being able to add new nodes with a password.
Fixed Error in obtaining the cluster kubeconfig accessed in Token mode.
Fixed Cannot get full users and groups when granting permissions.
Fixed an issue unbinding the workspace original permissions when the Bindingsync component is abnormal.
Fixed Workspace Resync does not properly remove unwanted permissions.
Fixed Delete the question in which the Namespace can also be selected.
Fixed Create a key. Key data is displayed in a single line.

2022-11-29¶

v0.13.0¶

Features¶

Added Replicatsets productization:
- Replicatsets can be managed using the WEB terminal (CloudTTY).
- Support for viewing Replicatsets monitoring, logs, Yaml, events, and containers.
- Support for viewing Replicatsets details.
- Linkage Workbench, the full life cycle of Replicatsets is managed by grayscale publishing.
Added Pod details page.
Added Namespace details page.
Added Use the WEB terminal to upload files to the container and download files from the Pod to the local.
Added The workload scales elastically based on the user-defined index, which is closer to the user’s actual business autoscaling requirements.

Improvements¶

Improved Deploy cluster support:
- Deploy a cluster using the cilium CNI.
- Create a cluster with nodes with different usernames, passwords, and SSH ports.
Improved The Pod list supports viewing the total number of pods and the number in operation, as well as viewing the container type.
Improved The workload increases the manual scaling window to simplify the user’s manual scaling process.
Improved The container log supports viewing init container and ephemeral container, providing a more friendly operation and maintenance experience.
Improved Node details. Note that the value does not correctly display the issue.
Improved Operation prompt feedback, giving the user correct feedback on the operation.

Fixes¶

Fixed Failure to create a namespace due to strong coupling between the namespace creation and the binding workspace.
Fixed The routing rule update failed to modify the path prefix issue for the forwarding policy.
Fixed Creating a workload interface while creating Services does not work.
Fixed Update service exception error reporting issue.
Fixed Unable to access the AWS cluster.
Fixed The user list is not synchronized after using the WS Admin user to bind the resource group.
Fixed On the configuration details page, when Page Size = 50, the List ClusterConfigMaps interface reports an exception.

2022-10-28¶

v0.10.0¶

Features¶

Added NetworkPolicy policy management features, including the creation, update, and deletion of NetworkPolicy policies, as well as the display of NetworkPolicy policy details, to help users configure network traffic policies for the Pod.
Added Workload supports multi-network card configuration and supports IP Pool display to meet the user’s requirement of configuring multiple network cards separately for workload configuration.
Added support to view the operation log of the creation process after the failure of cluster creation, to help users quickly locate the fault.
Added StatefulSets support the use of dynamic data volume templates.
Added Create cluster, create Secret, create Ingress, edit the information verification of namespace quota, help guide the user to input the correct configuration parameters, and reduce the user’s failure experience of creating jobs.

Improvements¶

Improved The cluster drop-down list supports the display of cluster status, and optimizes the user’s experience of selecting the managed cluster when creating a cluster, selecting the target cluster when creating a namespace, and selecting the target cluster when authorizing a cluster.
Improved Install the insight-agent plug-in in the helm app to support the automatic acquisition and filling of the insight-server related address of the global service cluster.
Improved The default icon when the Helm chart icon is empty.
Improved Select the network mode as None when creating the cluster to allow the user to install the network plug-in after the cluster is created.
Improved Cluster Operations Information Architecture:
- Adjust the cluster upgrade operation on the cluster list and cluster overview page to the cluster operation and maintenance feature in the cluster details.
- When a management cluster is removed from the cluster list, the cluster created based on this management cluster will hide the operations of upgrading the cluster, accepting managed nodes, and deleting nodes in the interface.

Fixes¶

Fixed an issues with selected namespaces being automatically converted to all namespaces on resource switch.